Customer Service - Peg-Perego Centro Instrucciones De Uso

Ocultar thumbs Ver también para Centro:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

EN•ENGLISH
• IMPORTANT: read the instructions carefully
before use. Save the instructions for future
reference.
• PEG PEREGO reserves the right to make any
necessary changes or improvements to the
products shown at any time without notice.

CUSTOMER SERVICE

If parts of the model are accidentally lost or
damaged, use only original Peg Perego spare
parts. Contact the Peg Perego Customer
Service for all repair work, replacements,
information about products, and sale of
original spare parts and accessories, at the
following:
USA:
tel.: 800.671.1701
fax: 260.471.6332
Call us toll free: 1.800.671.1701
CANADA:
tel.: 905.839.3371
fax: 905.839.9542
Call us toll free: 1.800.661.5050
www.pegperego.com
INSTRUCTIONS FOR USE
ASSEMBLING THE STROLLER
1• Remove the product from the box and
make sure you have all the following
pieces: handlebar, front bar with tray,
rain canopy, hood, cover, basket, and
front and rear wheel units.
2• To open the stroller frame, lift the safety
levers on the side bars as shown in the
figure.
3• Pull the side bars on the frame firmly
upwards.
4• Push the sides of the stroller downward
until they click into place, to completely
open the stroller frame.
5• To mount the front wheels, lower lever
A and fasten the wheels as shown in the
figure, clicking them into place.
6• Before mounting the rear wheel unit, slip
the rear leverage pedal into the tracks, as
shown in the figure.
7• Insert the rear wheel unit into the tracks
as shown in the figure. To fasten the
wheel unit to the tracks, insert the screw
from the outside and fasten the nut from
the inside. Use a screwdriver to fasten the
screw, while holding the nut tight on the
other side. Lower the rear leverage pedal
and fasten it to the stroller.
8• To mount the handlebar, line it up with
the two sides of the stroller, as shown in
the figure.
9• To fasten the handlebar, press the side
buttons as shown in the figure while
slipping the handlebar into place and
pushing it downwards. To fasten the
handlebar properly, make sure that the
buttons have passed by both holes on
the inside of the handlebar (shown by the
arrow). When the handlebar is properly
positioned, hole A should be lined up
with point B.
10• Fasten the handlebar to the sides of the
stroller, placing the cap on the outside
and the screw on the inside. Use a
screwdriver to tighten the screw on both
sides, without forcing it.
11• Before mounting the front bar, press the
side buttons on the armrests to extract
the hooks, as shown in the figure.
12• To fasten the front bar, keep the buttons
underneath it pressed while slipping it
onto the stroller.
13• Remove the basket from the packing as
shown in the figure, and assemble it.
14• Slip the two ends of the basket rod into
their housings. Make sure that the two
buttons are positioned correctly, and
fasten the two front basket loops to
them, as shown in the figure.
15• Fasten the basket loops on both sides, as
shown in the figure.
16• Before mounting the drink-holder, decide
which side of the handlebar you want
it on. Use both hands to open one of
the supplied bands as wide as possible,
proceeding as shown in the figure.Fasten
the drink-holder to the inside of the
band, as shown in the figure.
17• Insert the two caps as shown in the
figure, making sure to line them up
correctly. Use two coins to turn the caps
and fasten the drink-holder, as shown in
the figure.
Do not place hot drinks or drinks
weighing more than 0.5 kg. or 1 lb. in the
drink-holder.
HOOD
18• To fasten the hood to the stroller, insert
the hooks into their housings.
19• Button the hood to the back of the
backrest and to the inside of the
armrests, as shown in the figure.
20• Lower the braces on both sides, to pull
the hood taut.
21• Using the reversible feature, the hood can
also be mounted on the opposite side of
the handlebar. Before removing the hood
to place it on the opposite side, close it
and push it all the way forward to rotate
the hooks. Remove the hood and remount
it on the opposite side of the handlebar.
You can also rotate the hooks manually.

Publicidad

Tabla de contenido
loading

Tabla de contenido