Muskoka MH35ABB Guía De Uso Y Cuidado página 11

Operation (continued)
USING THE THERMOSTAT CONTROL BUTTON
The heat button (3) turns the heater on and off.
With the unit ON, press the control panel heat
button (3) for 5 seconds and enter temperature
adjustment mode. In the adjustment mode, the
digital indicator (6) will flash.
Press the heat button (3) to change to the desired
temperature. There are 10 temperature settings.
Reference the table for more detailed information.
After the temperature is selected, the digital display
(6) will stay on for 10 seconds, then turn off.
USING THE TIMER CONTROL BUTTON
Pressing the timer control button (5) will set the
timer. This interval period is shown in the display
(6) on the control panel on the side of the electric
fireplace. The set intervals are as listed in the table.
NOTE: If this product experiences exceptionally high
temperature, it may automatically stop heating. If this
occurs the product should be unplugged or isolated
from the main supply for a period of 30 seconds before
the power is then re-supplied.
NO HEAT FUNCTION (DEMO MODE)
To turn off heat mode, press and hold the heat button for 10 seconds to enter heat lock out mode.
Ember bed lights will flash 6 times to signal the heat function is turned off and locked out.
10 SEC
When the heat button is pressed in lock out mode, the ember bed will flash 6 times until heating mode is
turned on. To turn on heat mode, press and hold the heat button for 10 seconds, the ember bed will flash
6 times and the heat function will be restored.
DISPLAY VALUE
0
1
2
3
4
5
6
7
8
9
N
BUTTON PRESS TIMER INTERVAL
1st Press 1 Hour
2nd Press 2 Hours
3rd Press 3 Hours
4th Press 4 Hours
5th Press 5 Hours
6th Press 6 Hours
7th Press 7 Hours
8th Press 8 Hours
9th Press
TEMPERATURE SETTING
64°F/18°C
66°F/19°C
68°F/20°C
70°F/21°C
72°F/22°C
74°F/23°C
76°F/24°C
78°F/25°C
80°F/26°C
82°F/27°C
ON
DISPLAY VALUE
1
2
3
4
5
6
7
8
Off None
11