User Menu; User Menu - Constant Frequency; Usermenu - Ph; Usermenu - Rx - Aqua HC151 PH-RX Manual De Programación

HC151 PHRX
Digital multifunction solenoid metering pump

5. USER MENU

The user menu is the menu derived from the settings seen in previous chapters. The user through this menu
will pause the pump to prime and, if enabled, will be able to change the parameters of working mode.
USER Menu – Constant Frequency
5.1
MOD:CONSTANT
FREQ:<N>%
USERMenu – PH
5.2
MOD:PH
ph:<N> P:<N1>%
ENTER ENTER
SetP:<SP1> F:<FS1> %
L1PH:<L1>
USERMenu – RX
5.3
MOD:RX
mV:<N> P:<N1>%
ENTER ENTER
SP:<SP1> F:<FS1> %
L1:<L1>
ADSP9500092
N is input PH value read
N1 is dosing frequency
<SP1> is value set in 4.2.2. The user is able to use the Up and Down
keys to modify value
<FS1> is value set in 4.2.2. The user is able to use the Up and Down
keys to modify value
F:<FL1> %
<L1> is value set in 4.2.2. The user is able to use the Up and Down keys
to modify value
<FL1> is value set in 4.2.2. The user is able to use the Up and Down
keys to modify value
Press the Enter key to move from one parameter to another. When you
are on FL1, pressing Enter will return you to the previous menu.
N is input Redox value read
N1 is dosing frequency
<SP1> is value set in 4.2.3. The user is able to use the Up and Down
keys to modify value
<FS1> is value set in 4.2.3. The user is able to use the Up and Down
keys to modify value
F:<FL1> %
<L1> is value set in 4.2.3. The user is able to use the Up and Down keys
to modify value
<FL1> is value set in 4.2.3. The user is able to use the Up and Down
keys to modify value
Press the Enter key to move from one parameter to another. When you
are on FL1, pressing Enter will return you to the previous menu.
14/04/2015 Rev. 1.0
Based set in 4.2.1 we have a different view.
The user is able to use the Up and Down keys to modify
<N> value
ENGLISH
48/123