Checking The Work Angle - JF 9000 S2 Manual Técnico De Operación

OPERATION TECHNICAL MANUAL - FORAGE WAGON JF 9000 S2

4.4- Checking the work angle

The angle 0º is the center line of the tractor. The most angle allowed to the cardan, when it is
being driven by the TDP, is 15º. In case it exceeds this value (example: maneuvers), turn off
the PTO.
Note:
With the TDP ¨turned off¨, the cardan shaft angle in maneuvers can reach at most
30º.
The figure illustrated the most inclination angle allowed to the cardan, with the wagon moving
and the TDP running: 15º. In case the TDP is not running, the most angle is 30º.
15º
19