Haier HDY6-1 Manual Del Usuario página 13

English
Materials
Use only 4 inch (10.2 cm) diameter (minimum) rigid or flexible metal duct and
approved vent hood that has a swing-out damper hat open when the dryer is
in operation. When the dryer stops, the dampers automatically close to prevent
drafts and the entrance of insects and rodents. To avoid restricting the outlet,
maintain a minimum of 12 inches (30.5 cm) clearance between the vent hood
and the ground or any other obstruction. The vent flap should be able to
move freely.
MAXIMUM EXHAUST LENGTH
"
"
"
"
INSTALL MALE FITTINGS IN THE CORRECT DIRECTION
12