Preparation; Turning On Power - Haier HDY6-1 Manual Del Usuario

Preparation

Attention:
1. Before operation, clean inside the drum of the dryer by a wet towel.
2. Clean off debris on the filter screen and in the duct to increase the drying
efficiency.

Turning on Power

Before turning on the power for the dryer, check:
• Whether the supply voltage is in accordance with the value indicated on
the rating plate.
• Whether the supply receptacle can withstand the maximum power load
to the dryer.
• Whether the supply receptacle is in accordance with the plug of the dryer. If
not, replace the power supply cable or receptacle to make them accord with
each other. The replacement of the power supply cable must be made by a
state-certified electrician or our authorized service agent.
• The dryer must be grounded securely.
English
20