Adam Equipment MTB Serie Manual De Instrucciones página 4

EN
SPECIFICATIONS
Capacity (max.)
Readability
Weighing units
Power
Batteries
Pan Size
Overall Size (w x
h x d)
Net weight
OPERATION
Install batteries, ensuring the polarity is as shown in the battery holder, or insert the power
adapter jack into the connector on the rear of the scale and turn on.
Place the scale on a flat, very stable surface, and clear the scale platform.
Press the [ON/ZERO] key to turn on the scale.
Display will show 0.000 kg or 0.000 lb. depending on the last weighing unit selected.
It is now ready to weigh.
Put the subject on the scale platform, as central as possible. The display shows the weight.
Once reading is stable, the display flashes.
Press the [ON/ZERO] key briefly to tare the scale, setting the display to 0.000.
Any additional weight now added will displayed.
SELECT WEIGHING UNIT
Press the [MODE] key to change from kilograms to pounds and back again.
The display will show the weighing unit selected.
STORE THE WEIGHT
To store the displayed weight: Press the [MEM] key when the LCD display is flashing.
RECALL THE STORED THE WEIGHT
To recall the stored weight: Press the [MEM] key when the LCD display is at zero
Press it a second time to return to weighing.
To turn off the scale.
Press and hold the [ON/ZERO] key
The scale will turn off automatically after 5 minutes if it is not being used.
CALIBRATION
Place the scale on a flat, very stable surface, and clear the scale platform.
When the scale is off press the [MODE] key, then press the [ON/ZERO] key. Hold both keys
down until the display shows "CAL" then release both keys.
The display will show a number representing the internal count from the sensor
Press the [ON/ZERO] key briefly.
The display will flash "C10 " and then show "
Place an accurate reference 10kg mass on the platform (OIML class M1 recommended)
The display will show a number from the sensor.
Press the [ON/ZERO] key.
The display will flash "C20 " and then show " 0000".
© Adam Equipment Co. Ltd. 2016
20 kg 44 lb
0.005 kg 0.005 lb
kg and lb
6V, 500mA DC adapter
4 x AA size
560 x 285 mm
(22" x 11.2")
560 x 350 x 175 mm
(22" x 13.75" x 7.0")
3.2 kg (7 lb.)
0".
2
700660263RevA1-Sep13