Loading Door Strike
The door strike must be adjusted to have sufficient
tension to hold loading door closed against force of
load tumbling against it. Proper adjustment is when
8-15 pounds (35.6-66.7 N) pull is required to open
door.
If adjustment is required, refer to Figure 25 and
proceed as follows:
To adjust, open door, loosen jam nut and turn door
strike screw in or out as required. Retighten jam nut.
1
1
Door Strike
2
Door Latch
3
Jam Nut
Figure 25
M414038
2
3
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
To reduce the risk of electric shock, fire,
explosion, serious injury or death:
• Disconnect electric power to the tumbler
before servicing.
• Close gas shut-off valve to gas tumbler
before servicing.
• Close steam valve to steam tumbler
before servicing.
• Never start the tumbler with any guards/
panels removed.
• Whenever ground wires are removed
during servicing, these ground wires
must be reconnected to ensure that the
tumbler is properly grounded.
T048I
Adjustments
WARNING
W002
53