3.
Remove the upper door hinge (Fig. C) and unhook the door.
4.
Tilt the appliance and unscrew the feet and the lower hinge (Fig. D).
5.
On the opposite side of the lower edge there is a small screw to support the front
frame. Unscrew it and screw it back into the slot on the other side of the frame.
Figure C
r
eplACe the door
1.
Unscrew and pull out the hinge pin (Fig. G). Then pivot the front part backwards
while keeping the curved part of the hinge facing the ground (Fig. H). Finally,
screw the pivot pin back onto the hinge.
Figure G
Figure D
Figure H
21
V.1.0