Listo CAL 145-55b3 Instrucciones De Uso página 29

Congelador vertical
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Problems
The appliance does not
cool down enough. The
food is too warm.
Unusual noises.
The compressor does not
start immediately after
changing the temperature
setting.
If the information in this table does not help you solve your specific problem, do
not attempt any repairs on the appliance yourself. Contact your retailer's after-sales
department.
IMPORTANT: The appliance must only be repaired by qualified service technicians.
Improper repairs can lead to hazards for users and are not covered by the warranty.
i
n CAse of prolonged AbsenCe or shutdown
Set the thermostat button to mark 1 (minimum temperature).
Unplug, empty, defrost and clean the appliance.
Keep the doors ajar to avoid odours.
Possible causes
The temperature is not
set correctly.
The door stayed open too
long.
A large amount of hot
food has been placed in
the appliance in the past
24 hours.
The appliance is located
near a heat source.
The appliance is not
straight.
The appliance is touching
the wall or other objects.
Some noises are typical of
refrigeration appliances.
This is normal, it is not a
malfunction.
29
Solutions
Please refer to the
paragraph "Setting the
temperature".
Do not open the door
longer than necessary.
Temporarily set the
thermostat to a cooler
temperature. Do not
overload the inside of the
freezer.
Please refer to the
"Installation location"
section.
Adjust the feet.
Move the appliance
slightly.
Refer to the "Noise when
running" section.
The compressor will start
after a while.
V.1.0

Publicidad

Tabla de contenido
loading

Tabla de contenido