Listo CAL 145-55b3 Instrucciones De Uso página 24

Congelador vertical
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

g
etting stArted
Before plugging into the electrical outlet for the first time, leave the
appliance in place for 2 hours, to allow the refrigerant gas to settle in the
compressor. Not respecting this waiting period may damage the compressor.
Plug the appliance into an earthed mains socket.
s
etting the temperAture
The thermostat button switches the appliance on and off.
Adjustment to the mark
IMPORTANT: Every time the appliance is shut down, wait 5 minutes before
switching it on again, so as not to damage the compressor.
We advise you to set the thermostat to the "NORMAL" mark for normal everyday
use. This setting is appropriate for storing frozen food and maintains the
temperature in the freezer at -18°C.
Do not open the door of the appliance for the first 30 minutes. Leave the freezer
running empty for about 1 to 2 hours (depending on the room temperature).
In order to use the freezer when the appliance is first switched on or after a
prolonged shutdown, set the thermostat to the "MAX" mark for about 2 hours
before adding the frozen and deep-frozen products. Then turn the thermostat
back to its usual position.
The temperature inside the appliance is a function of several factors, such as
V.1.0
MAX
MIN
USAGE
Highest temperature
Lowest temperature
24
Corresponds to
Hottest setting
Coldest setting

Publicidad

Tabla de contenido
loading

Tabla de contenido