Listo CAL 145-55b3 Instrucciones De Uso página 22

Figure I
5. Finally, place the door in its hinge and close it so that the joints are affixed to the
frame.
Figure J
9.Tighten the rear cover screws and replace the covers (Fig. L).
Figure K
V.1.0
2. Replace the hinge on the other side and
tighten the two screws diagonally around
the foot. (Fig.' ) Then screw both feet
back on. Warning: the largest foot is on
the hinge side.
3. Straighten the freezer and make sure the
feet are stable.
4. Take the door and, using a screwdriver,
remove the small white cover on the top
edge of the door. Place it in the hole on
the other side of the top of the door.
6. Remove the two screws on the top part of the
freezer (now intended for the top hinge) and
screw them back on the other side to secure the
top frame.
7. Replace the upper door hinge and tighten the
three door screws.
8. Replace the cover, taking care to fit the front part
and replace the thermostat button (Fig. K).
screw in
22
Figure L