Pressure Test With Wsc System - Spin COUNTRY CLIMA Manual De Uso

Move with arrow keys on "Oil" or "UV" icons if you want to charge new oil.
Pressing "Enter" on the selected phase, the quantity of oil (in grams) to be charge will be visualized.
note:
- To confirm the set quantity and charge the oil press the key "Enter".
- If you want to confirm the programmed quantity without charging the oil press the key "C/E" (setting of the
automatic cycle);
NB: To charge the oil the installation must be vacuumed (make the vacuum of the a/c installation before);
If it is charged a different quantity of oil/gas from the programmed one, adjust it following the information in chapter
Set/up – Oil setting.
Gas charge function:
Make sure that the in the internal bottle there is enough gas before proceeding.
Move with arrow keys on "C" icon.
Pressing enter "Enter" the display will visualize the quantity of the saved quantity of gas.
Set with arrow keys the quantity of gas to be charged into the a/c system.
Note:
- To confirm the programmed quantity and charge the gas press the key Enter.
- If you want to confirm the programmed quantity without charging the oil press the key "C/E" (setting of the
automatic cycle);
At the end of the charge the display will visualize the message "Disconnect hoses" and it is possible to proceed in
two different ways as follows:
- To recover the gas in the hoses of Country CLIMA, disconnect the quick couplings from the a/c installation and
press "Enter",
- Otherwise press "C/E", the display will visualize the message "Print Report".
Confirming with "Enter" the latest operation will be printed out (only the Printer version). Press the key "C/E" if you
do not need the printing.
Print Report ?
9.4.

Pressure Test with WSC system

N.B. The "WSC System" function is not available in the version Country CLIMA
14/04/2016 Vers. 2 39