Kit Bipower; Information On Residual Risks - Spin COUNTRY CLIMA Manual De Uso

11.

Kit Bipower

(Only for Country Clima Bipower and Country Clima Bipower Printer)
To use the bipower kit connect the power cord 220V to the inverter and turn on the appropriate switches. Connect
the cables to a 12 V battery to run the station. For the use follow the above-mentioned instructions.
12.

Information on RESIDUAL RISKS

R
ESIDUAL RISKS ARE THOSE POTENTIAL DANGERS REMAINING ALTHOUGH PROTECTION MEASURES AND
COMPLEMENTARY PROTECTION ACTIONS WERE TAKEN DURING THE DESIGN OF THE MACHINE AND THEY ARE
1) ROLL-OVER OF THE MACHINE
If the operator does not fulfil the obligation, indicated in the manual, to accompany the machine during
movements and to insert the brake of the machine while using it, the operator may suffer severe crush
injuries due to the roll-over of the machine.
2) SPATTER LOSS OF GAS FREON
If the operator does not fulfil the obligation, indicated in the manual, about the correct connection of the
machine to the vehicle to close the taps of the bottle during extraordinary maintenance operations and to
wear protection glasses and gloves, the operator may suffer injuries due to the spatter of gas freon.
3) GASHING
If the operator does not fulfil the obligation, indicated in the manual, to disconnect the power supply before
working in the inside of the machine, the operator may suffer injuries due to the contact with the wings of the
electro-fan.
4) SUFFOCATION DUE TO GAS FREON
If the operator does not fulfil the obligation, indicated in the manual, about the correct connection of the
machine to the vehicle, to close the taps of the bottle during extraordinary maintenance operations, to use
the machine in a ventilated area and to perform the correct maintenance of the machine, the operator may
suffer injuries due to the inhalation of gas freon.
5) DIRECT CONTACT WITH HIGH VOLTAGE PARTS
If the operator does not fulfil the obligation, indicated in the manual, to disconnect the power supply before
working in the inside of the machine, the operator may suffer injuries due to the direct contact with high-
voltage parts.
6) INDIRECT CONTACT
If the machine is connected to a socket that is not protected against indirect contacts in compliance with the
norms in force in the country of use, as indicated in the manual, those people who come into indirect contact
with high-voltage parts may suffer injuries.
14/04/2016 Vers. 2
:
45