Automatic; Database - Spin COUNTRY CLIMA Manual De Uso

9.5.

Automatic

Make sure that in the internal bottle there is enough gas before proceeding.
Pressing any keys on the main menu (stand by), you reach the menu "Manual/Automatic";
Confirming the selection "Manual/Automatic" with the key "Enter" it is possible to make the whole cycle
automatically.
To change the visualized parameters follow the instructions in the chapter "Manual/Autom".
After changing the parameters, move with arrow keys on "Start" icon and confirm with "Enter".
The whole cycle will be performed automatically.
At the end of the charge the display will visualize the message "Disconnect hoses" and it is possible to proceed in
two different ways as follows:
- To recover the gas in the hoses of Country CLIMA, disconnect the quick couplings from the a/c installation and
press "Enter",
- Otherwise press "C/E", the display will visualize the message "Print Report".
Confirming with "Enter" the latest operation will be printed out. Press the key "C/E" if you do not need the printing.
To make the pressure test, select the function "WSC pressure test" from the menu and confirm with Enter.
NB: If there are some leaks in the installation, the display will visualize the message "System leak".
(only if the pressure test was set previously);
NB: Before the charging phase, if the quantity of gas inside the bottle is less than 1Kg, the display will visualize the
message "insufficient gas".
NB: The message is not visualized before starting the charging phase!
NOTE: Additive Function not present.
9.6.

Database

Make sure that in the internal bottle there is enough gas before proceeding.
To select the database press the key "ENTER" after selecting "DATA BASE" from the menu:
Use the arrow keys to look for the desired brand and confirm the selection with "enter".
Select the desired vehicle confirming with "enter"; Use the arrow keys to look for the version of the selected model.
Pressing the key "enter", all the parameters of the selected vehicle will be visualized. Select "start" to perform the
whole automatic cycle. To change the visualized parameters temporarily follows the indication in the chapter
"Manual/Autom".
At the end of the charge the display will visualize the message "Disconnect hoses" and it is possible to proceed in
two different ways as follows:
- To recover the gas in the hoses of Country CLIMA, disconnect the quick couplings from the a/c installation and
press "Enter",
- Otherwise press "C/E", the display will visualize the message "Print Report".
Confirming with "Enter" the latest operation will be printed out. Press the key "C/E" if you do not need the printing.
14/04/2016 Vers. 2 40