Printing (Only The Printer Version); Print Total (Only The Printer Version); Setup; Date - Hour - Spin COUNTRY CLIMA Manual De Uso

9.8.

Printing (Only the Printer version)

The printing function allows printing the latest performed operation.
Select "print" from the menu "Utilities" and confirm with enter.

9.8.1 Print Total (only the Printer version)

Country CLIMA comply with new European provisions concerning the storage of recovered and charged gas and
oil in a/c systems. Selecting from the menu Utilities the function "Print Total" it is possible to have a complete report
of the gas and the oil from the date of beginning (reset counters) to the date of the printing. The data can be also
visualized with the function "info" in the main menu.
9.9.

Setup

The Setup menu enables the user to change some settings of "Country CLIMA".
9.9.1 Date – Hour
Confirming the selection with the key enter it is possible to change date and hour. Use the arrow keys to change
the underlined data and press enter to confirm. Confirming the minutes you exit from the phase of adjustment of
date/hour. Press the key C/E to exit.

9.9.2 Language

Use this function to select the desired language.

9.9.3 Calibration test

The calibration test allows checking the conditions of the load cell of the gas/oil (if present) scale.

9.9.4 LCD Settings

It allows adjusting the back light and the contrast of the display. Use the arrow keys to change the displayed
values. Use the key enter to move between "backlight and contrast".
Press the key C/E to save the visualized value and exit.

9.9.5 File transfer

The function file transfer allows updating the database of Country CLIMA.

9.9.6 Oil setting

Use the function "oil setting" to adjust the quantity of charged oil depending on the viscosity and temperature.
The default value is 100 for oil. If it is charged more oil than the programmed quantity, reduce the default value
using the down arrow key. On the other hand if it is charged less oil than the programmed quantity, increase the
value using the up arrow key.
Use the arrow keys to change the underlined values and the enter key to confirm.
Press the key C/E to confirm and exit.

9.9.7 Hose setting

This function is not available in the version Country CLIMA
NB: To set hose pressure (LP and HP) open or close the low pressure or high pressure taps.

9.9.8 Hose Length Setting

The software of Country CLIMA allows to choose automatically the length of the hoses between following
possibilities: 0, 1 e 2.
Select 1 as default value, if using the standard hoses ( 5 m);
Select 0, if using the 3 m hoses
Select 2 (+ 280g). if using the 9 m hoses
Press C/E to confirm.
14/04/2016 Vers. 2 42