Tabla de contenido
Publicidad
INFORMACION DE SEGURIDAD IMPORTANTE
eLectroMaGnetIc
coMPatIBILIty
this unit conforms to the product specifications noted on the
Declaration of Conformity. operation is subject to the
following two conditions:
•
this device may not cause harmful
interference, and
•
this device must accept any interference received,
including interference that may cause undesired
operation.
operation of this unit within significant
electromagnetic fields should be avoided.
•
use only shielded interconnecting cables.
u.K. MaInS PLuG WarnInG
A molded mains plug that has been cut off from the cord
is unsafe. discard the mains plug at a suitable disposal
facility.
NEVER UNDER ANY CIRCUMSTANCES
SHOULD YOU INSERT A DAMAGED OR
CUT MAINS PLUG INTO A 13 AMP POWER
SOCKET.
do not use the mains plug without the fuse cover in
place. replacement fuse covers can be obtained from
your local retailer. replacement fuses are 13 amps and
must be AstA approved to Bs1362.
If you want to dispose this product, do not mix it with general household waste. There is a
separate collection system for used electronic products in accordance with legislation that
requires proper treatment, recovery and recycling.
Private household in the 25 member states of the EU, in Switzerland and Norway may return their used
electronic products free of charge to designated collection facilities or to a retailer (if you purchase a similar
new one).
For Countries not mentioned above, please contact your local authorities for a correct method of disposal.
By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery and
recycling and thus prevent potential negative effects on the environment and human health.
DecLaratIon of
conforMIty
manufacturer's Name:
manufacturer's Address:
declares that the product:
product name:
product option:
conforms to the following product specifications:
safety: iec 60065 (7th ed. 2001)
emc:
eN 55013 (2001+A1)
eN 55020 (1998)
supplementary information:
the product herewith complies with the requirements of the
Low Voltage directive 2006/95/ec and the emc directive
2004/108/ec.
Vice-president of engineering – mi
8760 s. sandy parkway
sandy, utah 84070, usA
date: February 21, 2008
european contact: Your local digitech sales and service office or
harman music Group
8760 south sandy parkway
sandy, utah 84070, usA
ph: (801) 566-8800
Fax: (801) 568-7583
digitech
8760 s. sandy parkway
sandy, utah 84070, usA
harmonyman
all (requires class ii power
adapter that conforms
to the requirements of
eN60065, eN60742, or
equivalent.)
Publicidad
Tabla de contenido
