Browse Through Menus; Register Your Other Hand Set On A Base; Other Functions - Sagem D70H Manual Del Usuario

Livre du MD+.book Page 23 Mardi, 9. septembre 2003 5:04 17
O F
THER UNCTIONS

Browse through menus

Menus are organized in a hierarchical tree structure. Using the menu
block diagram, identify the path giving access to the selected function and
follow the instructions below:
On the navigator key
is displayed; confirm with OK. Repeat the operation until the function is
displayed on the screen and confirm with OK.
For any further information concerning the functions above, refer to the
base user brochure.

Register your other hand set on a base

To use your SAGEM D70H hand set on the public telephone network from
your base, you must register and match it with a base compatible with the
European GAP standard.
Get the user brochure on the base on which you want to register it, match
your SAGEM D70H hand set and find the paragraph corresponding to the
registration or matching of an additional hand set.
To register a new hand set on a base it is necessary to:
• put the hand set to registration mode,
• put the base to matching mode.
Then matching (mutual recognition of the base and the new hand set) will
be done automatically (registration may take several seconds).
Get hold of the hand set to register:
On the navigator key
Settings, confirm with OK.
Select Adv. Settings using keys
Select HS Settings using keys
Adv. Settings
SMS Settings
HS Settings
OK
Base Settings
Return Confirm
, press or until the required path or function
, press or until the screen displays
or . Press Confirm
or . Press Confirm
23
.
.