Technical Specifications; Cutting Width; Putting The Machine Into Service - Grillo HWT 550 TILT Manual De Instrucciones

TRIMMER-Translation of the original instructions
TECHNICAL SPECIFICATIONS HWT550 TILT
ENGINE: HONDA GCV 160 OHC 160 cm³ 4,4 HP (@ 3600 r.p.m.) one cylinder 4-stroke petrol engine
STARTER: pull-starting system with recoil starter
FUEL TANK: 0,9 litres
HOURLY CONSUMPTION: 1,1 Lt/h
CUTTING HEIGHT: 1,5 – 3 – 5 - 6 cm
CUTTING WIDTH: 60 cm
WHEELS: 16'' fitted on bearings
WHEELS AXLE: adjustable
CUTTING HEAD: 6° laterally reclining into 3 positions: right, left and central
STANDARD FEATURE: grass-guard protection
TECHNICAL SPECIFICATIONS HWT600 WD
ENGINE: HONDA GCV 160 OHC, 160 cm³ 4,4 HP (@ 3600 r.p.m.), one-cylinder 4-stroke
petrol engine
STARTER: recoil starter
FUEL TANK: 0,9 Litres
HOURLY CONSUMPTION: 1,1 l/h
GEARBOX: mechanical with single-speed
CLUTCH: oil bath multiple-disc clutch
SPEED: 2 km/h
CUTTING HEIGHT: adjustable at 1,5 – 3 – 5 – 6 cm.
CUTTING WIDTH: 60 cm
WHEELS: 16'' diameter
AXLE: fixed.
EXTERNAL DIMENSIONS WITH WHEELS: 540 mm
STANDARD FEATURE: grass-guard protection

PUTTING THE MACHINE INTO SERVICE

1) Check that the machine has not been damaged in transit.
2) Mount both the wheels (fig. 6)
7
8