Publicidad
STORAGE - CUST OFF
STORAGE
In case the machine should not be used for more
than 30 days, make sure that the room in which it is
stored presents a suitable shelter from heat sources,
weather changes or anything which can cause rust,
corrosion or damages to the machine.
ENGINE
Empty the tank: then start the engine until it will stop
for total lack of fuel.
Drain the oil from the engine sump and fill it with
new oil
Pour about 10 cc of oil into the spark plug hole and
screw the spark plug, after having rotated the cran-
kshaft several times.
Rotate the crankshaft slowly until you feel a certain
compression, then leave it.
.
Clean the covers and all the other parts of the ma-
chine carefully.
Protect the machine with a plastic hood and store
it in a dry place.
In case of necessity for first aid and f fire prevention,
see page. M2.5.
IMPORTANT
!
In the storage and/or cust off operations
avoid that polluting substances, liquids,
exhausted oils, etc. bring damage to
people or things or can cause negative
effects to surroundings, health or safety
respecting completely the laws and/or
dispositions in force in the place.
GE 2500 SR FAMILY
GE 3200 H FAMILY
GE 4500 HBS /GE 4500 HBS-AVR
CUST OFF
As cust off we intend all operations to be made,at
utilizer's care,at the end of the use of the machine.
This comprises the dismantling of the machine, the
subdivision of the several components for a further
reutilization or for getting rid of them, the eventual
packing and transportation of the eliminated parts
up to their delivery to the store, or to the bureau
encharged to the cust off or to the storage office, etc.
The several operations concerning the cust off, invol-
ve the manipulation of fluids potentially dangerous
such as: lubricating oil and fuel.
The dismantling of metallic parts liable to cause
injuries or wounds, must be made wearing heavy
gloves and using suitable tools.
The getting rid of the various components of the
machine must be made accordingly to rules in force
of law a/o local rules.
+ Particular attention must be paid when get-
ting rid of lubricating oils and inflamable
liquids such as fuel.
The machine user is responsible for the observance
of the norms concerning the environment conditions
with regard to the elimination of the machine being
cust off and of all its components.
In case the machine should be cust off without any
previous disassembly it is however compulsory to
remove:
-fuel tank
-engine lubricating oil
NOTE: The manufacturer is involved with custing off
the machine only for the second hand ones, when
not reparable.
M
45
REV.0-01/08
Publicidad
