Internal Cleaning; Replacing Of The Illuminant - CORBERO CF1PKMB48GLASS Manual Del Usuario

3. Dry the cleaned surfaces with a cloth.
1. Clean the shelves and the other removable parts with warm water and a mild,
non-acrid detergent.
2. Use clear water to rinse.
3. Dry the cleaned surfaces with a cloth.
4. Clean the interior with baking soda ( 3 tablespoons per 1 litre of water ) or with
water and a mild, non-acrid detergent.
5. Use clear water to rinse.
6. Dry the cleaned surfaces with a cloth.
7. Check the water drain and clean it if needed.
Clean with warm water and a mild, non-acrid detergent.

4.1 Replacing of the illuminant

1. Set the thermostat to MIN and disconnect the appliance from the
mains, before you change the illuminate
2. Remove the screw of the illuminant cover with a screwdriver.
3. Remove the illuminant cover.
4. Unscrew the old illuminant (anticlockwise direction).
5. Replace the old illuminant with a new one of the same kind and power (10W
SES).
6. Reinstall the cover.

Internal cleaning

Door seals
10