Stop Mode - TechniSat TechniVision 22 ST Manual De Instrucciones

5.3.3 Stop mode

Many teletext pages consist of multiple subpages. This is shown by two numbers separat-
ed by a slash (current subpage/number of subpages) in the teletext image. As soon as a
new subpage is available, it is displayed automatically.
Press the STOP button to stop the device from switching the subpage
>
automatically.
The current subpage will now remain on the display.
> Press the button once more to re-activate automatic switching to the next
subpage.
5.3.4 Teletext subpages
In addition to stopping the device from switching between subpages automatically, you
may also select and display specific subpages.
Please note that the operation of the TV teletext decoder and the operation of the DVB
teletext decoder differ from one another in this case.
5.3.4.1 DVB teletext decoder
First, press the OK button to open the subpage selection screen.
>
A list of unread teletext subpages is displayed on the left side of the display.
Use the up/down arrow buttons to highlight the teletext subpage that you
>
would like to view.
Press the OK button once again to exit the subpage selection screen.
>
5.3.4.2 TV teletext decoder
First press the SUBPAGE button.
>
The yellow field on the bottom corner of the screen now switches to the subpage
selection screen.
Use number buttons 0 through 9 to enter the four-digit number for the desired
>
teletext subpage.
For example:
0, then 0,
Press the SUBPAGE button once again to exit the subpage display.
>
5.3.5 Increasing the size of the teletext display
Use the SIZE button to switch between three different display options: increase
>
the size of upper half, increase the size of lower half and display the teletext in
normal size.
then 0, then 1
17
for subpage 1
for the TV teletext decoder only