Picture Format; Sleep Timer - TechniSat TechniVision 22 ST Manual De Instrucciones

5.4 Subtitles
Please note that this function is available only for digital programmes that actually trans-
mit subtitles. If a programme transmits only a subtitle identifier but no subtitles, this can-
not be displayed. The remote control must be in DVB mode in order to select the subti-
tles. To switch the remote control to DVB mode, press the Digital button.
When subtitles are transmitted, this is indicated by the display
tion is switched on, subtitles will be displayed automatically, provided subtitles are availa-
ble for the language you selected.
If subtitles are transmitted via teletext or are only available in other languages, you can
switch them on manually as follows:
Press the OPT button (several times, if necessary) until a selection screen show-
>
ing the available subtitle languages and/or teletext pages on which subtitles are
transmitted appears below the Subtitle option.
Use the up/down arrow buttons to highlight the desired language and teletext
>
page.
Press the OK button to confirm your subtitle selection.
>

5.5 Picture format

Your TV set is equipped with one adjustable picture format and three preset formats.
These picture formats have different brightness, contrast, saturation and picture sharp-
ness settings. You can configure the PERSONAL picture format as desired.
Press the P.MODE button to select between four picture modes: PERSONAL,
>
STANDARD, DYNAMIC and SOFT.

5.6 Sleep timer

You can use the sleep timer to set the time your TV set switches off.
Press the SLEEP button multiple times to set the desired time after which your TV
>
set is to switch off automatically: 15 min, 30 min, 45 min, 60 min, 90 min or
120 min.
While the sleep timer is activated, press the SLEEP button to display the time
>
remaining on the timer.
To switch the sleep timer off, press the SLEEP button multiple times until the dis-
>
play of the switch-off time reads: Off.
18
. If the Subtitles func-