Local Time Setting - TMI VD31 Manual De Operación

1) Pull out the crown to second click (VD31) / first click (VD32) when the second hand is at the 12 o'clock
position.
2) Turn the crown to set the hour and minute hands. (make sure 24 hour hand is set correctly).
3) Push the crown back in the normal position in accordance with a time signal.
Note :
* The 24 hour hand moves correspondingly with the hour hand.
* The moment the date changes is midnight. When setting the hour hand, make sure that AM/PM is
correctly set by using the 24 hour hand as an AM/PM indicator.
* When moving to a country or area in a different time zone, adjust the dual hour hand to that
country / area :
[ Quick set the dual time ]
1) Crown at normal position.
2) Adjust the time by pressing the button A or B.
Button A : - 1 hour / push
Button B : +1 hour / push
[ Precise adjustment of the the dual time ]
1) Pull out the crown to second click (VD31) / first click (VD32) when the second hand is at the
12 o'clock position.
2) Adjust the time by pressing the button A or B.
Button A : -10 minute / push
Button B : +10 minute / push
3) Push the crown back in the normal position in accordance with a time signal.
* Before setting the date, be sure to set the time.
1) Pull out the crown to the first click.
2) Turn the crown clockwise until the desired date appears.
3) Push the crown back in the normal position.
Note :
* Do not set the date during any time between 9:00 P.M. and 1:00 A.M. Otherwise, the date may not
change properly. If it is necessary to set the date during that time period, first change the time to any
time outside it, set the date and then reset the correct time.
Operation Manual
VD31 / VD32

LOCAL TIME SETTING

DUAL TIME SETTING
DATE SETTING (VD31 only)
English