Tools Required; Measurement And Marking - Petsafe Staywell Infra-red 800 Serie Manual Del Usuario

Before installing this dog door please
read the following step-by-step instructions
carefully. Please note that this product
is not designed to fi t into glass.

Tools required

• Pencil
• Ruler
• Jig or Keyhole Saw
• Drill
• Screwdriver
• Tape measure
• Sand paper

Measurement and marking

Measure the belly height of your dog. (Fig. 1).
Mark this measurement and draw a straight horizontal line measuring
291mm (11 1 / ") (Fig. 2). Ensure line height is suffi cient to avoid weakening
2
the base of the door.
Please bear in mind that this line will eventually be the bottom of the hole
you will cut in your door and that the frame of the dog door will be slightly
lower. If necessary, this line may have to be raised slightly to account for this.
2
FIG.1
(X)
Cutting a hole for your dog door
a) In Wood and PVC/uPVC/Metal
The dog door requires a square cut-out of 429mm x 291mm (16
FIG.3 291mm (11 / ")
1
2
Not to scale - for best results you should refer
to the enclosed cutting template.
FIG.2
Wooden doors
7 / " x 11 1 / "). (Fig. 3).
8 2
429mm
(16 7 / ")
8
PVC/uPVC/Metal