Riassunto Dell'uTilizzo Degli Switch - Adeunis RF ARF 18 Instrucciones Para El Uso

2.10. Riassunto dell'utilizzo degli switch

Questo paragrafo riassume le funzionalità degli switch. Per un utilizzo standard (impostazione), il paragrafo non
apporta alcun valore aggiunto e può essere ignorato. Conoscere l'utilizzo degli switch è necessario solo per un
uso avanzato.
In particolare, il paragrafo mette in luce come scegliere un relè specifico per la procedura di impostazione avan-
zata.
Switch no.
SW5
SW4
SW1 and SW2
SW3
Gamme ARF18 UG V1.6
Function Description
Add/Remove SW5 OFF: The «Add/Remove» function is not
enabled.
SW5 ON: The «Add/Remove» function is enabled.
Erase SW4 OFF: The «Erase» function is not enabled.
SW4 ON: The «Erase» function is enabled.
-> When the module is in training mode, («Add/Re-
move» or «Erase» enabled), «SW1» and «SW2»
select the relays to be configured:
SW2
SW1
Chosen relay
ON
ON
4
ON
OFF
3
Relay selection or
operating mode
OFF
selection (monos-
ON
table or bistable)
2
OFF
OFF
1
-> When the module is not in training mode, input
«SW1» selects the operating mode for relays 1 and
2, and «SW2» selects the operating mode for relays
3 and 4.
SW1 ON: relays 1 and 2 in bistable mode.
SW1 OFF: relays 1 and 2 in monostable mode.
SW2 ON: relays 3 and 4 in bistable mode.
SW2 OFF: relays 3 and 4 in monostable mode.
Global SW3 serves to determine whether the training ope-
ration is carried out for all the relays or not.
-> SW3 ON: the training operation is carried out for
all the relays (SW1 and SW2 are ignored). Func-
tionality depends on the function chosen («Erase»
SW4 or «Add/Remove» SW5).
Other details concerning the global add/remove
and global erase operations are described in the
following tables.
-> SW3 OFF: the training operation only applies to
relays chosen with SW1 and SW2.
108