Specifications; Power Supply For The Remote Control - Adeunis RF ARF 18 Instrucciones Para El Uso

3.

Specifications

Frequency:
Modulation:
Sensitivity:
Power supply (VDC):
Consumption (all relays open):
Consumption (all relays closed):
Interrupting capacity:
Contacts
Size (mm):
IP65 casing:
Terminal
Operating temperature:
3.1.

Power supply for the remote control

In order to replace the battery in the remote control, slide the lower cover as shown below.
Battery: 3 V type CR 2032
Please note, there is a risk of explosion if the battery is thrown into the fire or if it is replaced with a battery of the
wrong type. Dispose of used batteries in accordance with the instructions.
Advice concerning lithium batteries
WARNING
Observe the polarities when replacing lithium batteries. Incorrect installation of the battery may lead to an explo-
sion. Only replace the battery with a battery of the same or equivalent type recommended by the manufacturer.
Dispose of used batteries in accordance with the manufacturer's instructions and your local authority's disposal
requirements.
IMPORTANT Switzerland: Appendix 4.10 of standard SR 814.013 applies to batteries.
Gamme ARF18 UG V1.6
Radio characteristics
433.92 MHz
ASK
-104 dBm
Electrical characteristics
15 to 30 VDC
30mA
85mA
230V max 10 A
Relay characteristics
4 relays with 1 NO (4-relay version)
2 relays with 1 NO and 1 NO / NC (2-relay version)
1 relay with 1 NO / NC (1-relay version)
Mechanical characteristics
Board 65 x 90 x 25 mm
104 x 300 x 35 mm
Connection via M3 1.5/2.5mm² screws
-20 to +70 °C
51