CST/BERGER Lasermark 58-ILMXT Manual De Instrucciones página 12

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 14
3:
Slowly move the laser detector in an upward and downward direction until the LCD beam
indicator arrows appear and/or a pulsing audio signal is heard. Use the Beam Resolution
feature to choose between the coarse/low setting, used for approximating level or for initial
locating of the center level point, the medium setting, used for greater accuracy,
used for the most accurate pinpointing of level.
4:
Move the detector upward when the low beam indicator light is lit (with volume on, a slow
pulsing audio tone is heard). Move the detector downward when the high beam indicator
arrow is lit (with volume on, a rapid pulsing audio tone is heard). When the beam is level, the
level beam indicator line will be lit and a solid audio tone will be heard.
If the detector is not struck by a laser beam after 5-8 minutes, the detector will automatically shut
itself off to preserve battery life. Turn the laser tool back on using the power button.
Note: The Detector will only work when the laser tool is in Indoor/Outdoor Mode.
Special Features– Laser Detector
The laser detector has a unique memory feature, which preserves the last position of the laser
beam if the detector is moved out of the plane of laser light, as well as built in electronic filtering
for bright sunlight and electromagnetic interference. Three distinct audio tones (high, on-grade,
and low) assist targeting from a distance.
Care of Your Line Laser Detector
This laser tool is gasket sealed for water and dust protection. Use a soft, dry cloth to remove any
dirt or moisture from the laser tool before storage. Do not use benzene, paint thinner, or other
solvents to clean the laser tool. Remove batteries before long-term storage of the laser tool.
Specifications-Laser Detector
D D e e s s c c r r i i p p t t i i o o n n
Dimensions:
Weight:
Range:
Line Detection
Sensitivity:
(sensitivity based on standard conditions with most lasers;
may vary slightly due to make, manufacturer, beam size, or working conditions)
Readout:
Power:
Warranty:
12 • ILMXT
L L L L D D - - 2 2 0 0
6.6" h x 3" w x 1" d (169mm x 76mm x 25mm)
10 oz. (275g)
Up to 100' (30m)
Medium ≤ 0.050 " (1.3mm)
Wide ≤ 0.100 " (2.5mm)
LCD, front and rear windows
One 9-volt battery; provides 3 months of typical usage
1 year (For warranty conditions see "Warranty")

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Lasermark 58-ilmxte

Tabla de contenido