Software Update; Led Chart - Powersoft audio X Serie Guía Rápida

Software update

powersoft X Series amplifier platforms embed a com-
plete digital audio signal management system based on
arM cortex a-8 processor and Ti c6000 DSp platform.
This impressive on-board computing capacity is driven by a
dedicated software environment.
updated releases of the X Series software are available
on the armonía forum (http://www.powersoft-audio.com/
en/armonia-forum).
The package contains the software update file whose
name is in the form:
update-version#-model.bin
(e.g. update-v1.5.0.6-x4.bin); in order to update the software
of your X Series amplifier platform you must store the soft-
ware update file into a uSB key and follow these instructions:
1. Switch the amplifier on and wait for the completion of
the boot sequence.
2. plug the uSB key with the software update file to the
uSB port in the front panel of the amplifier.
3. keep pressed the rightmost pushbutton (armonía call-
back) until the second beep is emitted and the LEDs
start blinking.
...
uSB key in
Blinking
4. Wait until the amplifier restarts and all front LEDs turn
solid blue.
22 | X Series
6

LED chart

all circular back illuminated buttons provide status in-
formation. The cENTEr of each channel button provides
status information about the ouTpuT signal.
Center color
OUTPUT indicators
color
blue
yellow
The riNG of each channel button provides status infor-
mation about the iNpuT signal.
color
(center blue)
channel fault and armonía callback are associated to
the following LED signals.
blinking / all channels
The central button light on when the system is in standby
mode or in case of failure in the power supply unit:
color
(all LEDs off)
(normal operating)
color
Center color
OUTPUT indicators
status color
channel
orange
ready
Limiter orange
active blinking
Ring color
INPUT indicators
status
white
blinking input signal presence
red input signal clipping
color
red blinking
channel fault
(center and ring)
unit answering to
(center and ring) armonía callback
Ring color
CENTRAL button
status
white
System powered
pulsing
Standby mode
red
fan fault detected
pulsing
(output stage side fan)
Center color
CENTRAL button
status
red power supply or pSu fan
blinking fault detected
yellow power supply
blinking temperature protection active
7
status
MuTE
ouTpuT
MuTE
iNpuT
status