1.
Make sure that you have the correct power adapter with the 5000FX.
2.
READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT.
3.
Study this setup diagram.
4.
Place mixer in an appropriate position for operation.
5.
Make sure all devices are turned off and all faders and gain knobs are set to "zero"
6.
Connect all stereo input sources as indicated in the diagram.
7.
Connect the stereo outputs to power amplifier(s), tape decks, and/or other audio sources.
8.
Plug all devices into AC power.
9.
Switch everything on in the following order.
•
audio input sources (i.e. turntables or CD players)
•
mixer
•
last, any amplifiers or output devices
10. When turning off, always reverse this operation by,
•
turning off amplifiers
•
mixer
•
last, any input devices
11. Go to http://www.numark.com for product registration.
More information about this product may be found at http://www.numark.com
MIXER QUICK SETUP
3