Trial Sowing; Adjustment Table Of The Seeder - GASPARDO S MARIA Serie Empleo Y Mantenimiento

4.4.9 TRIAL SOWING

For precise sowing, we recommend performing a trial sowing with
the machine stationary to check the desired quantity to be sown
by proceeding.
IMPORTANT
Remember that when sowing large seed (peas, soy beans,
etc.), it is advisable to disconnect the seed agitator shaft from
the transmission (Fig. 413) to avoid damage to the seed itself.
During the sowing test, pay attention to the points at which
there are parts in movement: seed agitator shaft, dosing
rollers, etc..
Perform the preliminary adjustments given in the adjustments table
ADJUSTMENT TABLE OF THE SEEDER, according to seed type,
and in the following order:
- Gear lever position according to the quantity to be distributed
(Fig. 411);
- Selection of distributor rollers (Fig. 407);
- Botton gate position (Fig. 409).
IMPORTANT
Remember that when sowing large seed (peas, soy beans,
etc.), it is advisable to disconnect the seed agitator shaft from
the transmission (Fig. 413) to avoid damage to the seed itself.
Once the machine has been set, proceed as follows:
1) Extract the lock pin (A, Fig. 414) and move the bush housing
in the direction of the arrow.
2) Position the required containers under the metering units.
3) Fill the seed hopper to mid-load.
4) Insert the crank (Fig. 415) on the gearbox shaft and rotate
counterclockwise.
5) Before starting the test, turn the handle a few times to load the
distributors with seed, then empty the seed collecting trays.
6) Turn the handle the number of turns given in the CRANK
TURNS (Table 4) for the type of seeder and tires being used.
7) Weigh the seed collected in the trays and multiply the weight
by 100 or 40, depending on the number of rotations made.
The value obtained is the number of kilograms distributed per
hectare.
8) After seed discharge has been completed, return the bush
housing to their initial work positions.
4.4.8 ADJUSTMENT TABLE OF THE SEEDER (Table 5)
0,8 0,5
A
B
7
0
2 3/4
1
2
cod. G19503221
USE AND MAINTENANCE
0,65 0,75 0,35 0,75
A
2 2 2
g. 413
g. 414
A
g. 415
0,75 0,65 0,8
2 5 5 6/7
ENGLISH
0,8 0,77 0,75 0,65
B
6 2 1
1
1 3
*
EN - 59