Descargar Imprimir esta página

Suction Control - Grundig VCC 7070 C Manual De Instrucciones

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 39
OPERATION ______________________________
1
Pull out the the power cord to the required
length
.
J
Caution
A yellow mark on the power cord indicates the
recommended cord length. Never try to extend
the cord length beyond the red mark.
2
Insert the power cord
socket.
3
Switch on the appliance by pressing the On/
Of button
.
O
4
Set the required suction power with the power
adjustment controller
Note
You can hold the vacuum cleaner by the car-
rying handle to move the appliance, but make
sure that the appliance is switched off before
carrying.
5
After use, press the On/Of button
switch of the appliance and remove the
power cord plug from the wall socket.
Caution
Always disconnect the mains plug from the
wall socket when the appliance is not in use.
6
Hold the power cord in one hand and press
and hold the button
7
Carefully guide the power cord back into the
appliance.
22 ENGLISH
plug into the wall
J
.
N
to
O
.
K
Caution
Always rewind the power cord with care as
pressing one side of the button
winding speed can cause unforeseeable cable
movements.

Suction control

The suction control
B
and can be operated with your thumb. When
the control
is fully closed, the maximum suc-
B
tion power is reached.
However, in some cases it is advisable to have
less suction power, such as when cleaning mate-
rial, upholstery or shag pile carpets. Open the
control if and when required.
at a high re-
K
is located on the handle

Publicidad

loading