Safety and
recommendations
Please take note of the following before using the Pipa
infant car seat and base.
Make sure that your vehicle is equipped with 3-point retractable
safety-belt. Seat belts may be different in design and length
according to maker, manufacturing date, and type of the vehicle.
The infant car seat with base is a "Semi Universal ISOFIX Class
C and D Child Restraint" and should be fitted using at 3 point
adult seat belt approved to ECE R16 or the ISOFIX connections.
Please refer to the Vehicle fitting information at the back of this
manual.
If you have any questions or comments regarding the Pipa
Infant Car Seat, we will be glad to hear them through our web
site nuna.eu
IMPORTANT! RETAIN FOR
FUTURE REFERENCE. READ
CAREFULLY.
Read these instructions carefully before use and keep
them for future reference. Your child's safety may be
affected if you do not follow these instructions.
This product is suitable for use with children weighing
under 13 kg (approximately 1.5 years old or under). Please
carefully read this manual and follow each step to ensure a
comfortable ride and best protection for your child.
15
For use
without base
1. This infant car seat is a 'Universal' child
ECE.R44/04
restraint. It is approved to European
UNIVERSAL
0 -13 kg
Regulation No. 44, 04 series of amendments,
E
11
for general use in vehicles and it will fit most,
44R-041592
but not all, car seats.
2 A correct fit is likely if the vehicle manufacturer has declared
in the vehicle handbook that the vehicle is capable of
accepting a 'Universal' child restraint for this age group.
3 This Infant Car Seat child restraint has been classified as
'Universal' under more stringent conditions than those which
applied to earlier designs which do not carry this notice.
4 Seat positions in other cars may also be suitable to accept
the child restraint. If in doubt, consult either the child
restraint manufacturer or the retailer.
16