Tecfrigo Sommelier 63 Manual De Instrucciones página 6

!
WARNINGS
It is most important that this instruction booklet is kept together with the appliance both for future
reference and for reasons of safety. 1. Adults should operate this appliance only. Do not allow children
I
to use the controls or play with it. 2
characteristics of this appliance. . The electrical installation of the appliance should be carried out by a
qualified electrician or other competent person. . Never attempt to carry out repairs unassisted. Inexpert
UK
repairs can cause serious damage and malfunction. . Assistance has to be provided by an authorized
engineer only. Always use original spare parts. . This appliance is not suitable for the storage of basic
D
commodities not including food-stuffs. . The manufacturers of this appliance accept no responsibility for
the consequences of misuse in contravention of these safety instructions. It further reserves the right to
E
carry out improvements without prior notice. 8
9 . Nevere install the appliance near sources of heat, such as radiators, stoves, etc.
F
ventilation grills free from obstruction for at least 30 cm.
shelves and grills do not hang over the edges.
NL
ice to form on the evaporator, we recommend stopping the compressor and placing the goods in special
refrigerated containers, kept at the same temperature, until defrosting is completed;if this is not carried
P
out the compressor will continue to operate leading to a wasteful consumption of electricity and poor
performance.
least 10 cm.
S
As the refrigerant used in this appliance is a flammable gas (
!
DK
be taken to prevent damage to the refrigerant circuit and piping during transport and installation.
FIN
B
GR
!
Our products are for internal use only do not install outside restaurants, shops.
CZ
1. UNPACKING INSTRUCTIONS
CARDBOARD BOXES. 1a.
EE
2 . Lift the appliance. . Remove the pallet or crate. . Place the appliance on a flat, level surface.
sure the appliance is not damaged. On the contrary, immediately report any damage you may have
LV
noticed. 6. Make sure there is nothing left in the package before disposing of it. . Sort out the packaging
materials in order to facilitate disposal.
LT
- Transport, unpack and use two persons to set down the device because of the heavy weight of the
device.
H
- Only remove the blue protective film shortly before setting up the device in the location where it will be
used, to prevent scratches and dirt accumulations.
M
2. INTERNAL CLEANING
1. Clean the internal surfaces and glass panels with a soft sponge and a neutral detergent.
PL
soft dry cloth.
SK
3. EXTERNAL CLEANING
1.
Use the same products as used for the internal cleaning. . Dry with a soft clean cloth.
SLO
4. CONNECTION TO THE MAINS
1. Ensure that mains voltage and frequency are the same as those stated on the rating plate
to the appliance. . Ensure that there is no danger of explosion (AD) in the room. . Ensure that the
supply socket:
rating plate; c)
stated on the rating plate; - differential with Id sensitivity = 30 mA.
suitable for the power supply cable provided. The cable of the appliance is H05 VVF, designed for
internal use. . Insert the plug in the socket (do not use three-way adapters and reduction adapters).
N B.:
. If the equipment has been transported or stored overturned, let is rest in its correct position for at
least 3 hours before hooking it up to the mains.
5. CHECKING CORRECT OPERATION
Before use make sure that: 1
the goods to be stored;
direct sunlight or to powerful lamps;
7. there is sufficient ventilation for the motor compartment; there is a clearance of at least 10 cm between
the wall and the rear side of the appliance;
6. INSTALLATION
1. Install the appliance in a dry environment, away from direct sunlight. . Use the front feet to level the
machine
. It is forbidden to modify in any way the main functions and
3
7
13 . If the appliance is not working and unused, it is indispensable to keep the door open at
Cut surrounding tape. Remove the cardboard package by sliding it upwards.
3
2
a) is properly earthed; b)
complies with the IEC regulations:- thermal-magnetic switch with In = rated value as
5
. the plug is connected;
3.
the lights are turned on; . door is firmly closed;
6. ambient temperature does not exceed +30°C with 55% R.H.;
Operator's guide
4
5
6
. Avoid installing the cabinet directly in line with sunlight.
11 . Ensure that the products displayed on the
12 . If damp air or products to be refrigerated should cause
Isobutane R600a
4
2
fulfils the requirements of the rated current as set out on the
2. thermostat shows the desired temperature for
4
8. the cabinet is suitably filled and shelves are not overloaded.
6
10 . Keep the
), special care must
7
2.
3
4 . Make sure the environment is
5.
appliance is not exposed to
2
5. Make
Wipe with a
(A) attached