29 8.3 Measuring Unbalance - Sicam SBMV955 Manual Original

i
The electronic vernier caliper can be used to record
rim diameters of up to 26". The data of wheels with a
rim diameter between 26" and 30" must be recorded
manually (main page <F1> or in program selection
<F5>).
2. Apply the electronic gauge arm for rim width to the rim.
651012-32_Sr
« The measurement location is indicated on the
monitor in accordance with the balancing program
selected.
« Storage of the position is confi rmed by an acoustic
signal and the position data are displayed.
"
The individual values have now been read in and are
displayed on the monitor.
i
Refer to Section 10. if the values are not read in
automatically.
Sicam snc società unipersonale
Wheel balancing | SBMV955 | 41
8.3 Measuring unbalance
i
A wheel can only be correctly balanced if all the
settings correspond to the clamped wheel.
i
Measurement can be stopped at any time:
$
Press <F1> (STOP).
$
Press the pedal downwards.
$
Open the wheel guard.
1. Close the wheel guard.
« The unbalance measurement commences
automatically.
« On completion of the measurement the masses
and positions of the balance weights are indicated
on the monitor.
« The wheel is automatically braked after the
measurement and stopped and fi xed in the correct
position for attachment of a balance weight.
2. Open the wheel guard.
en
| |
656 407 2010-11-22