Bt Connecting And Playback; More Features - auna KR-400 Manual De Instrucciones

• The system can detect and read the file under MP3 format only at USB
mode but not other music file format.
• If connect the system to MP3 player via the USB socket, due to
variances in file system format, some MP3 player may not be able to
play via the USB socket. This is not a malfunction of the system.
• USB port does not support connection with USB extension cable and is
not designed for communication with computer directly
• Due to ErP stage two requirement and protect the environment(for
European market only). The unit will switch to standby mode
automatically once no any music playing over 15 minutes.
Removing of USB
To remove the USB turn off the power or switch the function mode to either
cd or tuner mode first. For USB port – un-plug it by
pulling out the USB socket directly.

BT CONNECTING AND PLAYBACK

1. Press the Function button (15) to select " BT / AUX " mode.
2. If the Aux-in jack is not connected, the system will switch to BT mode
automatically and " BT " with flashing of "Pairing" will be shown on the
LCD display (1). It means the BT in non connection / searching mode.
3. Switch on the BT feature of your BT device (such as mobile phone) and
select " Goldsound " BT equipment to connecting.
4. Once the connecting was finish and connect successfully, the LCD
display (1) will show " BT Connected ".
5. Start to playback your BT device and enjoy the music by the main unit.
6. Adjust the Volume Up/Down button (3) to desired volume level.
7. To disconnect the BT connection, turn off the BT feature of your BT
device. The LCD display will show " BT " with flashing of "Pairing" for
pairing of new device or switch off the unit.

MORE FEATURES

Sleep function
1. Press " Sleep " button (on Remote) "SLP-90 " will shown on the LCD
display (1).
2. Keep pressing the button to adjust the sleep timer in the order of 90 >
80 > 70 >....10 minutes respectively and sleep icon "z
LCD.
3. System will stop and go to standby mode automatically after running
the selected time.
4. To cancel the sleep mode, press " Sleep " button until "SLP-off' displayed
and the " " indicator disappear on LCD display. 
Z " will indicate on
Z
EN
33