Basic Operation; Before Starting Playback - Denon DN-C630 Instrucciones De Operación

ENGLISH
4

BASIC OPERATION

POWER
COMPACT DISC PLAYER
PHONES LEVEL STOP CUE
MIN MAX
6
-2

(1) Before Starting Playback

1
Load a disc.
Make the presettings according to the usage purpose.
(See page 20.)
NOTE: Step 1 and 2 can be performed in the opposite
order.
Select the play finish mode. (Preset Function)
Finish Stop
Finish Next
2
Finish Recue
To standby at the point where the sound begins.
(Preset Function)
Set the "CueDet." Level.
When a track is selected, the position at which the sound
begins is found when a track is cued and the standby
mode is set at that point.
Select the play mode.
Press the PLAY MODE button.
3
Select the track to be played.
Turn the select knob (
4
Flashing during search
The selected track is cued and the standby mode is set.
12
6 3 5
-1 -1
DN-C630
OPEN / CLOSE TIME
0%
PLAY
END MON INDEX REPEAT A-B PITCH
TRACK MODE
PLAY / PAUSE
PROG.PLAY
SEARCH PROG. IN
ON / OFF
PRESET
4,5 7
-2
The stop mode (the servo functions
turn off) is set when playback
finishes.
The standby mode is set at the
beginning of the next track when
playback is finished.
* After the final track is played, the
standby mode is set at the
beginning of the first track.
When playback is finished, the
standby mode is set at the position at
which playback was started.
Single track
play mode
Lit
Continuous
play mode
– ).
8 9
Lit when standby
To select an index number.
Press the INDEX button.
INDEX
5
-1
NOTE: The track select mode is set when the button is
Turn the select knob (
5
-2
The selected index number is cued and the standby mode
is set.
If a non-existent index number is selected,
" No 02.Index " appears and the index number
flashes.
To check the play start position.
Press the PLAY/PAUSE button.
PLAY / PAUSE
6
-1
Monitor the playback signals to check the play start
position.
Press the CUE button.
CUE
6
Lit
-2
The pickup returns to the play start position and the
standby mode is set. (Back Cue)
To check the play end position.
Press the END MON button.
END MON
7
NOTE: If the CUE button is pressed during the end
monitor operation, the end monitor operation is
canceled, the pickup returns to the play start
position and the standby mode is set.
The index number appear when the index
select mode is set.
off.
There is no need to select an index number when
you want to play the track from the beginning.
– ).
8 9
Index number Index number
Flashing during search Lit when standby
Lit Off
PLAY / PAUSE
Flashing
CUE
The end monitored, then the pickup
returns to the play start position and the
standby mode is set. (End Monitor)
CUE
Lit
CUE