Part Names And Functions; Front Panel - Denon DN-C630 Instrucciones De Operación

1

PART NAMES AND FUNCTIONS

(1) Front Panel

q
POWER button
• This turns the set on and off.
w
Disc holder
• Place discs in this holder.
• Press the OPEN/CLOSE button to open and close the
disc holder.
• Load discs firmly inside the slot.
e
OPEN/CLOSE button
• Press this button to open and close the disc holder.
• The disc holder will not open during playback.
r
TIME button
• Press this button to switch the time display between the
remaining time (REMAIN) and the elapsed time
(ELAPSED).
t
PLAY MODE button
• Press this button to switch the play mode.
• Press this button to cancel the track reserved with the
next track reserve function.
y
END MON button
• Press this button in the standby mode to monitor the
end of the track. (End Monitor)
u
INDEX button
• Press this button to set the index select mode, then use
the select knob to select the index number.
• The INDEX number appear when the index select mode
is set.
• Press the button again to return to the track select mode.
i
REPEAT button
• Press this button to set the repeat mode.
• The REPEAT indicator lights when the repeat mode is
set.
• Press the button again to cancel the repeat mode.
o
A-B button
• Press this button to set the A point.
• The A- indicator flashes when the A point is set.
• Press this button when A point is set to set the B point.
• The A-B indicator flashes when the B point is set.
• Press the button again to cancel the A-B repeat mode.
! 0
PITCH button
• Press this button to switch to the play speed set with the
Pitch Slider. The PITCH LED flashes.
• When the button is pressed again, the fixed pitch mode
is set and the PITCH LED lights.
• Press the button again to cancel the pitch play mode and
return to normal speed.
! 1
PHONES jack
• Connect headphones with an impedance of 30 t0 40
Ω/ohms.
! 2
LEVEL control
• Use this to adjust the volume of the headphones.
! 3
STOP button
• Press this button to turn all the servo functions off stop.
• Press this button during playback to set the stop mode.
! 4
CUE button
• When this button is pressed during the play or pause
mode, the pickup returns to the position at which
playback started and the standby mode is set. (Back
Cue)
• When pressed during playback when the next track has
been programmed, the programmed track is searched
for the standby mode is set.
• The CUE LED lights when the standby mode is set.
• When the button is pressed while pressing the PLAY
MODE button, the preset mode is set.
! 5
PLAY/PAUSE button
• Press this button in the standby, pause or manual search
mode to begin playback.
• Press the button in the stop mode to search for the first
track and begin playback.
• The PLAY/PAUSE LED lights during the play mode.
• When the button is pressed during playback, the pause
mode is set. The PLAY/PAUSE LED flashes while the
pause mode is set.
! 6
Select knob (TRACK)
• Turn this knob to select the next track (or index number)
to be played.
• Use the INDEX button to choose whether to select
tracks or index numbers.
• Turn the knob clockwise by one click to move one track
(or one index number) forward, counterclockwise by one
click to move one track (or one index number) backward.
• When the knob turned while pressing it in, one click
corresponds to 10 tracks (or 10 index numbers).
• In the preset mode, use this knob to set and enter preset
settings.
• When setting programs, use this knob to select, enter
and check the program.
! 7
SEARCH buttons
• These buttons are used to accurately change the
positions where disc play will start.
! 8
PROG. PLAY ON/OFF button
• When this button is pressed while the PROG indicator is
lit, the program play mode is set.
• The button will not function during the A-B play mode.
• The PROG. PLAY ON/OFF LED lights during the program
play standby and play modes.
• When the button is pressed during the program play
standby or play mode, the program play mode is cleared.
! 9
PROG. IN button
• Press this button to set the program input mode.
• The button will not function during the play mode.
• The PROG indicator flashes when in the program input
mode.
• The PROG indicator lights when a program is set.
@ 0
Pitch Slider
• Use this slider to adjust the play speed. Slide up to
decrease the play speed, down to increase the play
speed.
ENGLISH
9