Amano TCX-22 Operación Manual página 16

Begin Daylight Saving Time
Note: DST is enabled and disabled in the Main Programming Menu. This
function defines the start date of DST. You only need to program it once.
Once set, it will automatically adjust year after year.
1. When the display flashes I6 bdL , press the ENTER
button.
2. Press the CHANGE button until the correct year
appears, then press the ENTER button.
3. Press the CHANGE button until the correct month
appears, then press the ENTER button.
4. Press the CHANGE button until the correct date
appears, then press the ENTER button.
5. When the display flashes the correct year, month
and date, press the ENTER button.
6. When the display flashes I6 bdL , press the CHANGE
button to move to the End Daylight Saving Time
Setting.
End Daylight Saving Time
Note: DST is enabled and disabled in the Main Programming Menu. This
function defines the end date of DST. You only need to program it once.
Once set, it will automatically adjust year after year.
1. When the display flashes17 EdL , press the ENTER
button.
2. Press the CHANGE button until the correct year
appears, then press the ENTER button.
3. Press the CHANGE button until the correct month
appears, then press the ENTER button.
4. Press the CHANGE button until the correct date
appears, then press the ENTER button.
5. When the display flashes the correct year, month
and date, press the ENTER button.
6. When the display flashes17 EdL , press the CHANGE
button to move to the Diagnostics Mode.
TCX-22
Page 14
Amano Cincinnati, Inc.