Amano TCX-22 Operación Manual página 7

Page 5
Illuminated Print Option
The TCX-22 is equipped with a feature that allows the print area to
illuminate. The switch is located on the back panel. When connected to
an AC adapter the unit will stay illuminated. When used with a battery, it
illuminates for about 20 minutes every time the LED switch is pressed.
Program Mode Guide
Unlock and remove the cover. Locate the PROGRAM, CHANGE and
ENTER buttons on top of the clock.
The PROGRAM button is used to enter and exit the Program Mode.
Press the PROGRAM button at any time to exit the Program Mode. If a
program step is in the process of being changed when this button is
pushed, the new information will not be saved.
The CHANGE button is used to change the information on the display.
When you are reviewing the main programming menu, use the CHANGE
button to advance to the next programming step. When you are revising
a programming step, use the CHANGE button to change the blinking
information.
The ENTER button is used to accept the information shown on the
display and save it in memory.
The RESET button is located on the right side of the clock. Pressing this
button will clear any jams or errors.
TCX-22 Amano Cincinnati, Inc.