Before Using The Appliance For The First Time; Cleaning The Appliance; Heating Up The Teppanyaki Surface; Operating The Appliance - Gaggenau VP 414 111 Instrucciones De Uso

en

Before using the appliance for the first time

Before using the appliance for the
first time
I n this section, you can find out what you must do
B e f o r e u s i n g t h e a p p l i a n c e f o r t h e f i r s t t i m e
before using your appliance to prepare food for the first
time. Read the safety information before you start.

Cleaning the appliance

Before using the appliance for the first time, clean it
thoroughly with lukewarm soapy water.

Heating up the teppanyaki surface

To eliminate the new-appliance smell, heat up the
teppanyaki surface without anything on it for a few
minutes at 200 °C.

Operating the appliance

S witching on
O p e r a t i n g t h e a p p l i a n c e
1
Push in the temperature control knob and turn it
clockwise or anti-clockwise to the required
temperature between 120–240 °C.
The illuminated ring behind the temperature control
knob flashes while the appliance is heating up. The
illuminated ring lights up continuously when the set
temperature has been reached.
2
If you do not want to cook on the entire heating
zone, you can use the left-hand control knob to
select only the front or only the rear area. Push in
the left-hand control knob and select the required
heating zone Q or R select.
3
After it heats up, use the spatula or a heat-resistant
brush (e.g. silicone brush) to spread a little oil or fat
evenly over the frying surface.
4
Place the food directly onto the frying surface
without a pot or pan.
5
Use the spatula supplied to turn the food.
8

Switching off

Turn the control knob to 0.
m
Warning – Risk of burns!
When the appliance cover is closed, this leads to a
build-up of heat. Only operate or switch on the
appliance when the appliance cover is open. Do not use
the appliance cover for keeping warm or setting down.
Only close the appliance cover once the appliance has
cooled down.
Caution!
Damage to the appliance
Remove spilled liquids before opening the appliance
cover.

Residual heat indicator

After switching off the appliance, the illuminated ring on
the temperature control knob slowly flashes until the
appliance has cooled enough for it to be safe to touch.

Keeping warm setting

The keeping warm setting enables you to keep food
warm once you have cooked it.
Turn the temperature control knob to the keeping warm
setting £. You can use the left-hand control knob to
select the entire area or only the front or rear area.

Safety shut-off

For your safety, the appliance has a safety switch-off
function. Any kind of heating will be switched off after
four hours if the appliance controls are not used during
this time. The heating element will also remain off after
a power failure. The illuminated ring behind the
temperature control knob is flashing white and orange
alternately.
Turn the temperature control knob to 0. You will now be
able to start the appliance again as usual.