Program The Handheld Remote - Petsafe HDT11-13910 Instrucciones De Uso

Step 4

Program the Handheld Remote

Note: The Handheld Remote is factory set to Mode 2. The Mode of the Handheld Remote can
be changed to fit your type or style of training.
To Change the Mode
1. Referring to the table below, adjust the Intensity Dial to the Mode you
want to use.
2. Turn the Handheld Remote over.
3. With a pen or paperclip, depress and release the Mode Button. When the
Mode Button is pressed, the Remote Indicator Light will be solid green. When released, it will
flash the number of times that matches the selected Mode.
For example, if Mode 2 is desired, adjust the Intensity Dial to Level 2. Once the Mode Button
has been depressed, the Remote Indicator Light will be solid green, and once the Mode Button
is released, the Remote Indicator Light will flash two times.
Note: Continuous stimulation will transmit for no more than eight continuous seconds no matter
how long the button is pressed. To reactivate, release and repress the button.
MODE UPPER BUTTON
FUNCTION
1 Tone B only
2
Tone B only
3
Tone B 1 second then
continuous stimulation set
by Intensity Dial
4 Continuous stimulation set
by Intensity Dial
5
Continuous stimulation set
by Intensity Dial
6
Continuous stimulation set
by Intensity Dial
7
Tone A only
8
Tone B only
DOG #1
DOG #1
DOG #1
www.petsafe.net
LOWER BUTTON
FUNCTION
Tone B 1 second then
continuous stimulation
set by Intensity Dial
Continuous stimulation
set by Intensity Dial
Continuous stimulation
set by Intensity Dial
Continuous stimulation
2 levels higher than
Intensity Dial setting
Continuous stimulation
2 levels higher than
Intensity Dial setting
DOG #2
Continuous stimulation
set by Intensity Dial
DOG #2
Tone A only
DOG #2
Tone B only
SIDE BUTTON
FUNCTION
Tone A only
Tone A only
Tone A only
Tone A only
Tone B only
DOG #3
Continuous
stimulation set by
Intensity Dial
DOG #3
Tone A only
DOG 3#
Tone B only
# OF
DOGS
1
1
1
1
1
3
3
3
9