Specifications - Shindaiwa BP35 Manual Del Proprietario / Usario

Mass:
Unit without fuel, cutting attachment and shield (ISO11806)
Volume: Fuel tank
Cutting attachment: (0ption)
Blade centre hole diameter
Blade rotational speed at maximum allowable engine speed
Thread
Gear ratio: Gear ratio and lubrication
Rotational direction of output shaft seen from above:
External dimensions: Length × Width × Height
Engine:
Type
Engine displacement
Maximum shaft brake power,
measured in accordance with ISO 8893
Engine speed at maximum engine power
Recommended maximum engine speed
with standard attachment installed
Recommended engine idling speed
Carburettor
Ignition
Spark plug
Starter
Clutch
Fuel:
Oil
Ratio
Fuel consumption at maximum engine power
Specific fuel consumption at maximum engine power

Specifications

Model
Metal blade
kg 9.7
L 1.2
mm 25.4
r/min 10000
Left-handed M8 x 1.25
1.36 reduction and good quality lithium grease
Anticlockwise
mm -
Air cooled two stroke single cylinder
3
mL (cm ) 33.6
kW 1.24
r/min 7500
r/min 11000
r/min 2500
Float type
Flywheel magneto, TCI system
NGK BMR6A
Recoil starter
Automatic centrifugal clutch
Regular grade petrol.
Minimum 89 Octane unleaded petrol is recommended.
Do not use fuel containing methyl alcohol or more than
10 % of ethyl alcohol.
Two stroke, air-cooled engine oil.
50 : 1 (2 %) for ISO-L-EGD Standard (ISO/CD13738),
JASO FC, FD grade and shindaiwa 50 : 1 oil or 25 : 1
(4 %) for JASO FB grade oil.
L/h 1.14
g/(kW•h) 810
28
Nylon line cutting head
2820 × 370 × 550
-