WEG CF W501 V1.8X Referencia Rápida página 22

Quick Parameter Reference, Faults and Alarms
Param. Function
P1067 External PID P. Gain
P1068 External PID I. Gain
P1069 External PID D. Gain
P1070 External PID Output Min.
Value
P1071 External PID Output Max.
Value
P1072 SoftPLC Parameter 63
P1073 External PID Minimum
Feedback
P1074 External PID Maximum
Feedback
P1075 External PID Feedback
Alarm Conf.
P1076 External PID Feedback
Alarm Low V.
P1077 External PID Feedback
Alarm Low T.
P1078 External PID Feedback
Alarm High V.
P1079 External PID Feedback
Alarm High T.
Notes:
ro = Read only parameter.
V/f = Available when V/f control mode is chosen.
cfg = Configuration parameter, value can be programmed only with motor stopped.
V V W = Available when V V W control mode is chosen.
20 | CFW501
Adjustable Range
0.000 to 32.767
0.000 to 32.767
0.000 to 32.767
0.0 to 100.0 %
0.0 to 100.0 %
-32768 to 32767
-32768 to 32767
-32768 to 32767
0 = Disable
1 = Enable Alarm
2 = Enable Fault
-32768 to 32767
0.00 to 650.00 s
-32768 to 32767
0.00 to 650.00 s
Factory User
Propr. Groups Pag.
Setting Setting
1.000
0.430
0.000
0.0 %
100.0 %
0
0
1000
0
2
5.00 s
900
5.00 s
HVAC 17-2
18-23
HVAC 17-2
18-23
HVAC 17-2
18-23
HVAC 17-2
18-24
HVAC 17-2
18-24
HVAC 17-2
HVAC 17-2
18-24
HVAC 17-2
18-25
HVAC 17-2
18-25
HVAC 17-2
18-26
HVAC 17-2
18-26
HVAC 17-2
18-27
HVAC 17-2
18-27