Improper Use; Information For The Disposal Of Electrical And Electronic Apparatus; Important Safety Information; Maintenance - AERMEC IDROBLOC C Serie Manual Técnico Y De Instalacion

IMPROPER USES
The device is designed and built to ensure the maximum safety
in its immediate vicinity as well as to resist atmospheric agen-
ts. The fan is protected against unwanted objects entering by
MALFUNCTIONS
IIf the unit malfunctions (the alarms cut in), remove the cause
of the alarms and restart the device. If the problem reoccurs,
promptly call the local After Sales Assistance office.
Do not lean on the heat exchan-
g e r c o i l : S h a r p

INFORMATION FOR THE DISPOSAL OF ELECTRICAL AND ELECTRONIC APPARATUS

Warning: this product contains electrical and electronic equipment that may not be disposed of through
normal municipal rubbish collection channels.
There are special centres for the separate collection of this material.
The electrical and electronic apparatus must be treated separately and in accordance with the relevant
legislation in force in the country the apparatus is installed in.
Batteries or accumulators in the apparatus must be disposed of separately in accordance with local regulations.

IMPORTANT SAFETY INFORMATION

The unit should not exceed the temperature limits showed in
the table quoted under the paragraph "WORKING RANGE".
Wind, earthquakes and other natural phenomena of extraordi-
nary intensity have not been considered.

MAINTENANCE

Ordinary maintenance (yearly):
• Clean the water filters
• Check that the water pump works properly
• Check the connections of the electrical power supply and
the earthing.
• Clean the condenser fins.
Following extraordinary maintenance carried out on refrigera-
tion circuits, with the replacement of components, carry out
the following operations before starting the machine again:
•Pay the greatest attention when restoring the refrigerating load
s u r f a c e s .
means of protection grilles. Do not rest tools or heavy objects
on the side heat exchanger coils so as not to ruin the fins.
Do not introduce objects or allow them
to fall through the grilles of the fan motor.
If the unit must be operated in an aggressive atmosphere or
with aggressive water please consult the factory.
indicated on the machine rating plate.
• Open all the cocks on the refrigerating circuit.
• Correctly connect the electrical power and the earthing
• Check the plumbing connections
• Check that the water pump works properly
• Clean the water filters
• Check that the condenser coils are not dirty or clogged
15