Operating Control And Displays - baltur BT 320 Guía Rápida

5 OPERATING CONTROL AND DISPLAYS

5.1 UI300 USer INTerFace
1
Display
The display shows in pictograms:
• the menu structure
• operating status
• parameters
• error messages
Back key
Jump to previous window.
cursor keys
You navigate in the menu using the cursor keys. You
use the "left'' and ''right'' keys to move step by step to the
selected row. At the end of the selected row, the cursor jumps
to the next row down, if possibleIf the menu has multiple
rows, you can use the "up" and "down" keys to switch rowsTo
display the parameters, switch between the individual fields.
ENTER keys
Press ENTER to call up the menu on the start screen.
You open the selected sub-menu from a menu window. By
pressing the ENTER key, you transfer the setting val-ues
from a parameter window.
2 3 4
1 Display
2 Back key
3 cursor keys
4 enter key
16 / 50
0006081511_201311
5.2MeNU FUNcTIONST
The menu is divided into three paths:
INFO
MANUAL
SETTINGS
INFO
Select the INFO path for information about the following:
• the burner
• errors that have occurred
• the software version
• display of check sums
• the serial number
• actuating drive positions (current damper position for each
channel)
• •digital inputs/outputs
MANUAL
Select the MANUAL to
• start and stop the burner manually
• adjust the internal burner firing-rate
SETTINGS
Select the SETTINGS path for information on, and to make settings
for, the following:
• the password
• the burner settings (display and settings)
• the actuator device settings (display)
• the air/fuel control system
• the "delete" curve
• the display settings