Control Solution; To Attach/Remove Meter To Test Strip Vial - TRUE METRIX GO Guía De Prueba Rápida

Control Solution (Control)
1. Lot Number (LOT) - Use for identification
when calling for assistance.
2. Expiration Dates (EXP)
3. Control Solution Level (1, 2 or 3)
Caution!
Write date first opened on bottle label. Discard bottle if either 3 months after first opening or date printed next
to EXP on bottle label has passed, whichever comes first. Use of control solution past the Expiration Dates may
give incorrect test results. Discard out-of-date products and test with new products. Do not drink control
solution.
We recommend testing at least 2 levels of control solution. Contact place of purchase or call 1-800-803-6025,
Monday - Friday, 8AM-8PM EST, for assistance with obtaining different levels of control solution.
Control Solution Bottle Label (example)
3
1
14

To Attach/Remove Meter to Test Strip Vial

Test Port
Vial Lip
2 2
The meter may also be used for testing
To attach:
without attaching to the vial.
1. Set test strip vial on
flat surface with vial
lip facing to the left.
2. With Test Port facing
front, place bottom of
meter firmly on vial
top. Meter must be
seated flat on top of
vial cap.
3. Holding the vial, twist
To remove:
the meter 1/4 turn
clockwise. The Test
1. Holding the vial, twist the meter
Port area on the meter
1/4 turn counterclockwise.
should cover the vial
lip if attached properly.
2. Lift off meter off the vial top.
15