CLIPIC STREPPER ST50 Manual Del Usuario página 113

Checks and maintenance
Carburettor idle speed check and adjustment
(1) Start up the engine and warm it up.
(2) When the engine is warm, turn the adjusting screw in or
out so that the engine may run at 1350r/ min.
NOTE
The engine idlee speed adjustment should be carried
out when the engine is in warmed state.
NOTICE
It is suggested that this adjustment be conducted by
approved CLIPIC dealer.
You can do it yourself with the above procedures if a
speedometer is available.
113
1. Idle speed adjusting screw
1