Recommended Lubricants; Engine Oil; Running-In - Betamotor RR 400 Manual De Instrucciones

RECOMMENDED LUBRICANTS

To maximize the vehicle's performance and ensure many years of trouble-free opera-
tion, we recommend using the following products:
PRODUCT TYPE

ENGINE OIL

BRAKE OIL
FORK OIL
TIE ROD GREASE
CLUTCH OIL
LIQUID COOLANT
Note
It is essential that all renewals should be performed with the products listed in the
table above.

RUNNING-IN

The running-in period lasts approximately 15 hours, during which it is advisable to:
1 During the first 3 hours of operation the engine should only be used to approxi-
mately 50 percent of its power. In addition, the engine speed should not exceed
7,000 rpm.
2 For the next 12 hours of operation the engine should only be used to about 75
percent of its power.
3 Use the vehicle after properly warming up the engine.
4 Avoid travelling at constant speed (changing the speed causes the different com-
ponents to bed in evenly and more quickly).
WARNING
After the first 3 hours or 20 litres of petrol change the engine oil.
• Always use high-octane unleaded petrol.
• After using the vehicle on rough ground for the first time, carefully check the
tightening of all nuts and bolts.
SPECIFICATIONS
BARDAHL XTM15W 50
BARDAHL BRAKE FLUID DOT4
EB-H16 SAE 7,5
BARDAHL MPG2
ARAL VITAM LS (mineral oil)
IP ECOBLU
105
2
GB