Suspensions: Telescopic Fork And Shock Absorber - Betamotor RR 400 Manual De Instrucciones

3
SUSPENSIONS
TELESCOPIC FORK
A
ADJUSTING THE REBOUND DAMPER
The hydraulic rebound damper determines
the behaviour of the telescopic fork during
extension and can be adjusted by means
of screw A. Turning the screw clockwise
(towards the + sign) increases the action
of the rebound damper; turning it anticlock-
wise (towards the – sign) decreases the
action of the rebound damper.
Standard adjustment:
12 clicks from the completely closed posi-
tion
B
ADJUSTING THE COMPRESSION
DAMPER
The hydraulic compression damper deter-
mines the behaviour of the telescopic fork
during compression and can be adjusted
by means of screw B located at the lower
end of the fork legs. Turning the screw clock-
wise increases the action of the compres-
sion damper; turning it anticlockwise de-
creases the action of the compression
damper.
Standard adjustment:
12 clicks from the completely closed posi-
tion
SHOCK ABSORBER
ADJUSTING THE HYDRAULIC COMPRES-
SION DAMPER (high and low speeds)
The shock absorber can be adjusted for
both high and low speeds.
The terms 'high' and 'low' refer to the com-
pression speed of the shock absorber, not
to the speed of the vehicle.
The low-speed adjustment affects the be-
haviour of the shock absorber during low-
speed compression; conversely the high-
speed adjustment affects its behaviour dur-
ing high-speed compression.
GB
130